Cabin Interior; Upholstery; Cabin V-Berth; Cabin Sink & Cabinet - Pro-Line Boats 2007 24 Walk Owner's Manual


Rod Holders w/Inserts – One pair of stainless steel rod holders with PVC inserts to
protect your rods. A 2

Rod Racks - A pair of rod racks is installed in the port and starboard freeboard of the aft
cockpit. Combined, they can accommodate up to 6 fishing rods.

Outriggers (Optional) - This option requires the installation of the optional hard top frame.
The outrigger installation includes a pair of outrigger bases, poles and lines. The bases
are constructed of anodized aluminum and are installed on the port and starboard sides
of the optional hard top. Turn the handle at the bottom of the outrigger base to rotate the
o
outriggers 90 (from the side to the aft end of the boat).

Cabin Interior

Upholstery

The berths of each 21 Walks cabin are outfitted in your choice of the Geometric Spice or Cosmic
Caribbean patterns and the rest of the cabin is decorated with coordinating pillows and bolsters.
Geometric Spice
Cosmic Caribbean
Please see the Service and Care section of this manual for information on how to clean and care for your
cabin cushions, pillows vinyl upholstery.
Cabin V Berth
To prepare the berth for sleeping, place the poly filler board over the porta-potti and set the filler cushion
on top of the poly to finish off the berth.
Cabin Sink and Cabinet
The cabin sink and countertop are made of the same gelcoat
covered fiberglass that is used in the construction of the deck
and hull of the boat. For information on keeping the sink and
countertop looking like new, please refer to the Gelcoat and
Fiberglass areas in the Service and Care section of this
manual.
Note: Do not place any hot materials on this Fiberglass
countertop as this surface could melt or burn.
nd
pair of rod holders can be added as an option.
39