Table of Contents
Advertisement
•
Rod Holders w/Inserts –
protect your rods.
•
Rod Racks - A pair of rod racks is installed in the port and starboard freeboard of the aft
cockpit. Combined, they can accommodate up to 6 fishing rods.
•
Outriggers (Optional) - This option requires the installation of the optional hard top frame.
The outrigger installation includes a pair of outrigger bases, poles and lines. The
are constructed of anodized aluminum and are installed on the port and starboard sides
of the optional hard top. Turn the handle at the bottom of the outrigger base to rotate the
o
outriggers 90
(from the side to the aft end of the boat).
Cabin Interior
Upholstery
The berths of each 21 Walks cabin are outfitted in your choice of the Geometric Spice or Cosmic
C
aribbean patterns and the rest of the cabin is decorated with coordinating pillows and bolsters.
Geometric Spice
Cosmic Caribbean
Please
see the Service and Care section of this manual for information on how to clean and care fo
cabin cu
shions, pillows vinyl upholstery.
C
abin V Berth
To prepare the berth for sleeping, place the poly filler board over the porta-potti and set the filler
on top of the poly to finish off the berth. An optional aft filler board with cushi
th
e length of the sleeping berth. This area also converts into a dinette when the table leg is installed.
Cabin Sink and Countertop
T
he cabin sink and countertop are made of the same gelcoat
covered fiberglass that is used in the construction of the deck
and hull of the boat. For information on keeping the sink and
countertop looking like new, please refer to the Gelcoat and
Fiberglass areas in the Service and Care section of
m
anual.
Note:
Do not place any ho
c
ountertop as this surface could
Two pair of stainless steel rod holders with PVC inserts to
t materials on this Fiberglass
melt or burn.
on may be added to extend
this
bases
r your
cushion
38
Advertisement
Table of Contents
