Optical Disc Recording Software Disclaimer; Safety And Compliance Information; Safety Precautions - Rimage Professional 3400 User Manual

Rimage Professional 3400 and 5400N User Guide

Optical Disc Recording Software Disclaimer

This Product, Software, or Documentation may be designed to assist you in reproducing material in which you own the
copyright or have obtained permission to copy from the copyright owner. Unless you own the copyright or have permission
to copy from the copyright owner, you may be violating copyright law and be subject to payment of damages and other
remedies. If you are uncertain about your rights, you should contact your legal advisor. If you are neither in possession of
the copyright nor have authorization from the owner of the copyright, unauthorized copying of copyrighted material on an
optical disc or any other media violates national and international legislation and can result in severe penalties.

Safety and Compliance Information

This manual and the indications on the product allow proper and safe operation. The indication marks below help protect
you and other persons from injury, and equipment from damage.

Safety Precautions

To ensure safety, read these precautions and familiarize yourself with their meaning before using the equipment.
, ,
Warnings!
•
The laser beam used by the CD/DVD Recorder is a Class 1
laser. Do not attempt to open the recorder. An authorized
technician should perform all service procedures.
•
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiant exposure.
•
Never use any optical instrument in conjunction with this
unit. To do so will greatly increase the hazard to your
eyes.
•
Do not disassemble or use tools on the printer. All service
procedures should be performed by a Rimage-authorized
technician, or sent in for Rimage-authorized repair.
•
The interior of the printer contains sharp edges.
•
Do not touch the heat roller.
•
Do not touch the circuit boards. The circuit boards can be
damaged by electrostatic.
•
Do not remove the back panel unless the autoloader has
been powered off.
•
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
•
This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
•
This equipment complies with FCC radiation exposure
limits set forth for a controlled equipment and meets
the FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65. This equipment has very low
levels of RF energy that it deemed to comply without
maximum permissive exposure evaluation (MPE). But
it is desirable that it should be installed and operated
keeping the radiator at least 20cm or more away from
person's body (excluding extremities: hands, wrists, feet
and ankles).
8
n
Cautions:
•
For continued protection against risk of fire, replace the
fuse only with the same type and rating. An authorized
technician should perform all service procedures.
•
Use only the supplied AC power cord, or use a safety
agency approved power cord. For applications outside
North America, refer to the nearest Rimage office for
assistance in selecting a locally approved power cord.
•
This product is designed for an office environment.
•
The Professional 3400 and 5400N contain a lithium
battery. There is a risk of explosion if the battery is
replaced by an incorrect battery. Dispose of the old
battery according to the manufacturer's instructions
included with the battery packaging.
•
All equipment with AC line voltage, or low DC voltages,
such as switches, power supplies, fuses, fans, and non-
stepper motors, must be replaced with Rimage-approved
components to maintain the safety approval issued by
UL.
•
Allow sufficient free space for opening the printer tray.
Do not touch the printer tray while it is in motion.
•
If the side cover is opened while power is supplied, the
printer will stop. Do not reach into the printer while
it is in operation. Do not attempt to bypass the door
interlock.
2001431_B