Rimage Professional 3400 User Manual page 30

c. Bring the supply roll up and around
the guide rollers on the left side of the
carrier.
d. Press down to install the supply roll,
as shown.

Note: Make sure that the
retransfer ribbon winds
underneath the supply roll.
4. Rotate the take-up roll counterclockwise to tighten the
retransfer ribbon.
5. Reassemble the printer.
a. Slide the retransfer ribbon carrier into the printer.
b. Turn the center latch clockwise to lock it.
c. Close the printer cover.
The printer is ready for use.
2001431_B
Supply Roll
Guide Rollers
Take-Up Roll
33