Optical Disc Recording Software Disclaimer; Safety And Compliance Information; Safety Precautions - Rimage Producer 8100N User Manual

Rimage Producer™ IIIN+ User Guide

Optical Disc Recording Software Disclaimer

This Product, Software, or Documentation may be designed to assist you in reproducing material in which you own the
copyright or have obtained permission to copy from the copyright owner. Unless you own the copyright or have permission
to copy from the copyright owner, you may be violating copyright law and be subject to payment of damages and other
remedies. If you are uncertain about your rights, you should contact your legal advisor. If you are neither in possession of
the copyright nor have authorization from the owner of the copyright, unauthorized copying of copyrighted material on an
optical disc or on any other media violates national and international legislation and can result in severe penalties.

Safety and Compliance Information

This manual and the indications on the product allow proper and safe operation. The indication marks below help protect
you and other persons from injury, and equipment from damage.
, Warning! According to ANSI (American National Standards Institute) standards, a warning is used to indicate situations
that could result in bodily injury to personnel operating or maintaining the equipment.
n
Caution: Indicates that failure to observe this guideline could result in loss or damage to the equipment, product,
software, or data.

Safety Precautions

To ensure safety, read these precautions and familiarize yourself with their meaning before using the equipment.
,
Warnings!
• The laser beam used by the CD/DVD Recorder is a
Class 1 laser. Do not attempt to open the recorder.
An authorized technician should perform all service
procedures.
• The laser beam used by the bar code scanner is a
Class 2 laser and can be harmful to the eyes. Do
not attempt to open the scanner. An authorized
technician should perform all service procedures.
• Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiant exposure.
• Never use any optical instrument in conjunction
with this unit. To do so will greatly increase the
hazard to your eyes.
4
7100N/8100N/6100N/6100
n
Cautions:
• For continued protection against risk of fire,
replace the fuse only with the same type and
rating. An authorized technician should perform all
service procedures.
• Use only the supplied AC power cord, or use
a safety agency approved power cord. For
applications outside North America, refer to the
nearest Rimage office for assistance in selecting a
locally approved power cord.
• This product is designed for an office environment.
• The Producer 6100N, 7100N and 8100N contain a
lithium battery. There is a risk of explosion if the
battery is replaced by an incorrect battery. Dispose
of the old battery according to the manufacturer's
instructions included with the battery packaging.
2001475_A