Clean The Tacky Rollers - Rimage Professional 3400 User Manual

Rimage Professional 3400 and 5400N User Guide
3. Prepare the printer for use.
a. Install the print ribbon carrier.
b. Turn the center latch clockwise to lock it.
c. Close the printer cover. The system is ready for use.

Clean the Tacky Rollers

# Tools required:
• Sponge swabs with long handles (included in the Everest cleaning kit)
• 99% Isopropyl alcohol
1. Remove the print ribbon carrier.
a. Lift the printer cover latch to open the cover.
b. Lower the printer cover.
c. Turn the center latch counterclockwise to unlock it.
d. Remove the print ribbon carrier.
-
Important! The ribbon carriers cannot be removed
from the printer unless the system is powered on.
2. Remove the print ribbon. For specific instructions, refer
to the Change the Print Ribbon
3. Clean tacky roller 1 on the print ribbon carrier.
a. Apply isopropyl alcohol to the sponge swab.
b. Use the sponge swab to clean tacky roller 1.
c. Use the sponge swab to remove any waxy buildup from
other parts of the print ribbon carrier.
38
procedure on page 27.
Tacky Roller 1
Print Ribbon Carrier
Print Ribbon Center Latch
Carrier
2001431_B