Rimage Desktop 360i Supplementary Manual

Rimage desktop 360i: supplementary guide

Hide thumbs Also See for Desktop 360i:

Download this manual See also: Setup & Installation, User Manual

Prepare the Rimage 360i for shipping

Before you begin

Important! Remove the inkjet cartridges.

Pack the unit

1. Prepare the Rimage 360i.

a. Place a piece of tape on the door

latch at the back of the Rimage

360i.

b. Cover the unit with a packing

bag.

c. Tuck the packing bag under the

unit.

112119_A

Prepare the Rimage 360i for shipping

Need help?

Do you have a question about the Desktop 360i and is the answer not in the manual?

Page 1 Important! Remove the inkjet cartridges. Pack the unit 1. Prepare the Rimage 360i. a. Place a piece of tape on the door latch at the back of the Rimage 360i. b. Cover the unit with a packing bag. c. Tuck the packing bag under the unit.
Page 2 Prepare the Rimage 360i for shipping d. Attach the foam forms. If necessary, turn the tabs (Qty. 3) on the foam forms so that the form will fit on the unit. Place the foam forms on the cardboard lift. Note: Place the...
Page 3 Tip: Hold opposite handles of the cardboard lift. b. Place the 360i and the foam forms in the packing box as shown. c. Place the accessory box over the 360i. 112119_A Prepare the Rimage 360i for shipping Accessory Front of 360i...
Page 4 Prepare the Rimage 360i for shipping d. Close the flaps in the order shown. 3. Tape the box. Important! Do not tape over the box handles. Front of 360i 112119_A...