Remove The Retransfer Ribbon - Rimage Professional 3400 User Manual

Remove the Retransfer Ribbon

1. Open the printer cover.
a. Lift the cover latch to release the cover.
b. Lower the printer cover.
c. Turn the center latch counterclockwise to unlock it.
d. Pull the retransfer ribbon carrier all
the way out of the printer.
-
Important! The ribbon carriers
cannot be removed from the
printer unless the system is
powered on.
e. Lay the retransfer ribbon carrier on a
flat surface.
2. Remove the used retransfer ribbon.
a. Lift up on the take-up roll to remove it from the right side
of the carrier.
b. Set the take-up roll aside.
2001431_B
Printer Cover
Center
Latch
Printer Cover
Latch
Left Side of Autoloader
Retransfer
Ribbon Carrier
Used Take-Up Roll
31