Rimage Professional 3400 User Manual page 25

Rimage Professional 3400 and 5400N User Guide
c. Lay the print ribbon carrier on its back.
Tip: Perform cleaning procedures while the print ribbon is removed. For more information refer to the
the Everest 400 Printer
d. Place the print ribbon carrier on a flat surface.
Tip: To keep the print ribbon carrier in place while you remove the print ribbon, position the carrier so that the
tab rests on the edge of a table or workspace.
Print Ribbon
Carrier
3. Remove the used print ribbon from the carrier.
a. Lift up on the supply roll to remove it from the right side
of the carrier
b. Set the supply roll aside.
c. Lift up on the take-up roll to remove it from the left
side of the carrier.
d. Set the take-up roll aside.
e. Lift the print ribbon carrier off of the print ribbon and
set it aside.
f. Discard the used print ribbon.
28
section on page 37.
Tab
Used Supply Roll
Used Take-Up Roll
Clean
2001431_B