Printer Requirements; Ribbon Requirements; Everest 400 Ribbons - Rimage Professional 3400 User Manual

Printer Requirements

This section describes ribbon, label design, and print requirements for the integrated Everest 400 printer.

Ribbon Requirements

-
Important!
• Rimage only supports the use of Rimage brand ribbons in our printers. Printer issues that occur as a result of using
ribbons from manufacturers other than Rimage are not included under your Rimage warranty or maintenance
agreement.
• For optimum results, make sure that Everest ribbons are stored at a temperature between 41° and 95°F (5° to 35°C)
and humidity level between 45% and 85%.
• Avoid moisture and direct sunlight.
• Do not reuse ribbons.
• Use only ribbons designed for your Everest 400 printer. Refer to the table below.
The integrated Everest 400 printer requires a print ribbon and a retransfer ribbon. The standard print ribbon has three
colors: Cyan, Magenta, and Yellow (CMY). These three colors combine in printing to create full-color discs. Print ribbons are
also available in black (monochrome).

Everest 400 Ribbons

Ribbon Type
3-color (CMY)
Black (monochrome)
Retransfer ribbon
2001431_B
Number of Discs Printed
500
1000
500
13