Setting The Baud Rate; Setting The Word Length; Setting The Stop Bits - Avery Dennison Monarch Tabletop Printer 1 System Administrator Manual

S e t t i n g t h e B a u d R a t e
Baud rate is the speed, in bits per second, at which the printer sends and receives data.
Select To
1200 Communicate at 1200 bits per second.
2400 Communicate at 2400 bits per second.
4800 Communicate at 4800 bits per second.
9600 Communicate at 9600 bits per second.
19200 Communicate at 19200 bits per second.
38400 Communicate at 38400 bits per second.
57600 Communicate at 57600 bits per second.
115200 Communicate at 115200 bits per second.
S e t t i n g t h e W o r d L e n g t h
Word length specifies the number of data bits the printer uses to define a character.
Select To
7 Set the word length to seven.
8 Set the word length to eight.
S e t t i n g t h e S t o p B i t s
A stop bit follows the data and parity bits to signal the end of a character.
Select To
1 Set the stop bit length to one.
2 Set the stop bit length to two.
3-2 System Administrator's Guide