Accessories; Factory-Installed Options; Shipping The Printer - Avery Dennison Monarch Tabletop Printer 1 System Administrator Manual

A c c e s s o r i e s
♦
928™ Stacker
♦
935™ External Rewind
♦
939i™ Intelligent Keyboard
♦
Supply Guide Extension (131438)
♦
USB cable (126738)
♦
203 dpi (128933ST)
300 dpi (130226) Replacement
Printhead
♦
Printhead CLEAN-STRIP (120350)
F a c t o r y - I n s t a l l e d O p t i o n s
♦
Internal Ethernet with
MonarchNet2™
♦
Peel mode
♦
Cutter Ready
♦
RFID Encode
♦
300 dpi printhead
S h i p p i n g t h e P r i n t e r
If you need to ship the printer to a different location and do not have the original
packaging, use the following part numbers to order the appropriate packaging materials.
1. Remove the ribbon roll, if one is loaded.
Remove the supply roll, if one is loaded.
2.
Close the printhead by pressing down on the thumb well until it clicks into place.
3.
Place the printer in the original box and secure with packaging material. Make sure
4.
the printer is adequately packed to avoid damage during shipment.
Part Number Description and (Qty.)
70101 Shipping carton (1)
70102 Bottom Pad (1)
70103 Top Pad (1)
70110 Scored Insert (1)
A-4 System Administrator's Guide
♦
933 Cutter
♦
938™ Verifier
♦
USB mini keyboard (160001)
♦
Tear Bar (131439)
♦
Serial Cable: 9-pin to 9-pin (126716)
♦
Packet Reference Manual –
Programmer's manual (TCADTP1PR)
♦
Printhead Cleaning Pen (114226)
♦
802.11a/b/g/n wireless with
MonarchNet2™
♦
Peel mode with internal liner take-up
♦
Cart Ready for use on Mobile
Workstation
♦
RFID Encode and Verify
(not available with peel mode)
♦
ADK script programming for special
applications
Part Number Description and (Qty.)
70107 Foam Support, Horizontal (1)
70108 Foam Support, Vertical (1)
70109 Angleboard (4)
00054301 Poly Bag (1)