E n t e r i n g t h e I P A d d r e s s
The IP (Internet Protocol) address is a unique identifier for a device on a network. It
consists of four 3-digit numeric fields, separated by periods. The printer has different IP
addresses for wired vs. wireless communication.
If using the optional keyboard, enter the IP address you need using the numeric keys and
press ENTER.
Select
To
IP Address
Change the printer's IP address.
Press or to highlight the position to change. Press CHANGE until
you see the number you need. Press SET to save the setting or press
CANCEL to exit without saving.
Note:
If you enter a series of digits greater than 255 for any segment of the IP address
and press SET, the printer does not save the setting. Correct the setting, then
press SET.
E n t e r i n g t h e S u b n e t M a s k
IP networks are divided using subnet masks. The subnet mask address determines
where the IP address belongs in the network. It consists of four 3-digit numeric fields.
If using the optional keyboard, enter the subnet mask you need using the numeric keys
and press ENTER.
Select
To
Subnet Mask
Change the printer's subnet mask.
Press or to highlight the position to change. Press CHANGE until
you see the number you need. Press SET to save the setting or press
CANCEL to exit without saving.
Note:
If you enter a series of digits greater than 255 for any segment of the IP address
and press SET, the printer does not save the setting. Correct the setting, then
press SET.
E n t e r i n g t h e I P G a t e w a y
The IP gateway (or router) allows connections (communications) between different
subnets on a network. It consists of four 3-digit numeric fields.
If using the optional keyboard, enter the IP gateway you need using the numeric keys and
press ENTER.
Select
To
IP Gateway
Change the printer's IP gateway.
Press or to highlight the position to change. Press CHANGE until
you see the number you need. Press SET to save the setting or press
CANCEL to exit without saving.
Note:
If you enter a series of digits greater than 255 for any segment of the IP address
and press SET, the printer does not save the setting. Correct the setting, then
press SET.
4-2 System Administrator's Guide