About Rfid Supplies; What Is Pitch - Avery Dennison Monarch Tabletop Printer 1 System Administrator Manual

A b o u t R F I D S u p p l i e s
RFID supplies can be damaged by static electricity. Ground yourself by touching
metal, such as the printer's metal base, before handling the RFID supplies.

What is Pitch?

Pitch is the length of the label measured from the leading edge of one label to the leading
edge of the next label as shown. Pitch includes the gap between die cut labels.
When using a short supply length, enable singulate mode to prevent adjacency issues.
♦ Die cut supplies:
♦ Black mark supplies:
♦ Aperture supplies:
Note: The leading edge is the edge of the label that exits the printer first; regardless of
how the format is designed on the label.
Measure this
distance
8-2 System Administrator's Guide
Measure from the leading edge of one label to the leading
edge of the next label.
Measure from the top of one black mark to the top of the
next black mark.
Measure from the top of one aperture hole to the top of the
next aperture hole.
Die Cut
Measure this
distance
Do not print
Measure this
in the gap!
distance
Aperture
Black Mark