Setting The Baud Rate; Setting The Word Length - Avery Dennison Monarch 9855 Operator's Handbook Manual

S e t t i n g t h e B a u d R a t e
To change the setting, from the Main Menu select Setup, Port Settings, then
Serial Comm. If password protection in enabled, press Feed/Cut three
times, then press Enter/Pause before you see the Setup Menu options.
Then, follow these steps.
1. Press or
SERIAL COMM
Baud Rate
2. Press Enter/Pause. The current setting is displayed, for example:
BAUD RATE
9600
Press or to display the baud rate you need, then press Enter/Pause.
Press Escape/Clear until you see the Main Menu.
S e t t i n g t h e W o r d L e n g t h
To change the setting, from the Main Menu select Setup, Port Settings, then
Serial Comm. Then, follow these steps.
1. Press or
SERIAL COMM
Word Length
2. Press Enter/Pause. The current setting is displayed, for example:
WORD LENGTH
8
3. Press or
Enter/Pause. Press Escape/Clear until you see the Main Menu.
5-2 Operator's Handbook
until you see
until you see
to display the word length you need, then press