Matrox Meteor-II Installation And Hardware Reference Manual page 17

Caution Some computers have a large, black-ridged heat sink that prevents boards from
occupying most PCI slots. Your Matrox Meteor-II must not touch this heat sink.
Therefore, choose a slot where the board completely avoids it.
3. If present, remove the blank metal plate located at the back of the selected slot.
Keep the removed screw; you will need it to fasten the Matrox Meteor-II board.
4. Carefully position Matrox Meteor-II in the selected PCI slot as illustrated below.
If you are using a tower computer, orient the board to suit the board slots in your
computer.
SCREW
METAL
PLATE
5. Once perfectly aligned with an empty slot, press the board firmly but carefully
into the connector.
6. Anchor the board by replacing the screw that you removed.
7. Connect your video sources. For details, see the Connecting external devices section.
8. Turn on your computer.
Installing Matrox Meteor-II /Multi-Channel
M A T R O X M
E T E O R - I I
32-BIT PCI BOARD SLOT
17
PCI form factor