Auxiliary Power Supply Input - Matrox Meteor-II Installation And Hardware Reference Manual

Pin
28
29
30
1, 3, 5, 7,
9, 11, 13,
21, 25,
27

Auxiliary power supply input

The auxiliary power supply input connector is a standard 4-pin male connector
that routes power from the computer to a camera (via the DB-44). Use the 4-pin
power cable provided with your board to connect to the power supply of your
computer. The operating current is 1.5 A with an auto-resettable fuse. Note that
this input is not available on the PC/104-Plus form factor.
The pinout of the auxiliary power supply input connector is as follows:
1
Pin
2
3
1
4
2
3
4
For customers planning to build their own cable, parts can be purchased from:
• Manufacturer:
• Connector:
Signal I/O Description
CLK_OUT O Clock output (TTL).
VSYNC I/O Vsync input or output (TTL).
HSYNC I/O Hsync input or output (TTL).
GND Ground.
Description
+5 V
Ground
Ground
+12 V
VEN
2490-04PRT
Board input and output connectors 49