Matrox Meteor-II Installation And Hardware Reference Manual page 24

24 Chapter 2: Hardware installation
The Matrox Meteor-II /Multi-Channel for PC/104-Plus, designed for Matrox
4Sight-II, has a custom video input connector that attaches directly to the
motherboard, which in turn, is hard-wired to the video-input connector on the
back side of the unit. Therefore, you can interface a camera with the PC/104-Plus
board by connecting the camera to your unit's video input connector. Detailed
information on connecting a video input to this board can be found in the Matrox
4Sight-II installation and hardware reference manual.