Matrox Meteor-II Installation And Hardware Reference Manual page 19

2. Check that you have an available PC/104-Plus connector on the motherboard, or
verify that your existing stack can support another board.
3. Remove the anchoring screws from the stack; do not discard them since you will
need them to fasten the Matrox Meteor-II board.
4. If you have existing PC/104 boards in your computer, remove them and stack
them on the PC/104-Plus board. PC/104 boards must be stacked last.
5. Carefully position Matrox Meteor-II over the connectors and press the board
firmly into place.
6. Replace the anchoring screws.
7. Set the rotary switch (next to the PC/104 (ISA) P2 connector) to 0 if installing
the first stackable board, or another appropriate setting if not the first. See the
section, Multiple board installation, in Chapter 3.
PC/104-
(PCI) connector
Motherboard
8. Connect your video sources. For details, see the Connecting external devices section.
9. Turn on your computer.
Installing Matrox Meteor-II /Multi-Channel
Plus
Video input
connector
P1
P2
PC/104
(ISA)
P1 and P2
connectors
Rotary
switch
19