Inspecting The Matrox Meteor-Ii /Multi-Channel Package; Standard Package; Optional Items - Matrox Meteor-II Installation And Hardware Reference Manual

• A computer with an empty 32-bit PCI expansion slot (bus-master capable).
• A CD drive, and a hard disk or network drive on which to install the Matrox
Meteor-II software.
Inspecting the Matrox Meteor-II
/Multi-Channel package
When you unpack your Matrox Meteor-II /Multi-Channel package, you should
check its contents. Note that optional parts might or might not be included,
depending on what you ordered. If something is missing or damaged, contact your
Matrox representative.

Standard package

If you ordered Matrox Meteor-II /Multi-Channel, you should receive the
following items:
• The Matrox Meteor-II /Multi-Channel board.
• The Matrox Meteor-II /Multi Channel Installation and Hardware Reference manual
(this document).
• A 4-pin power cable, included with Matrox Meteor-II /Multi-Channel for PCI
form factor.
• A 30-pin connector to interface with the video input connector, included with
Matrox Meteor-II /Multi-Channel for PC/104-Plus (stand-alone version).

Optional items

You might have also ordered one or more of the following:
• MIL-32/CD, which includes ActiveMIL; MIL-LITE/CD, which includes
ActiveMIL-Lite; or Matrox INSPECTOR-32/CD. Both the MIL and MIL-Lite
CDs include Matrox Intellicam.
• DBHD44-TO-8BNC input cable with a high density 44-pin connector and eight
BNC connectors for Matrox Meteor-II /Multi-Channel for PCI. Three
BNC-TO-SVHS (Y/C) adapter cables are shipped with the DBHD44-TO-8BNC
cable.

Inspecting the Matrox Meteor-II /Multi-Channel package

11