MTU 12 V 4000 G73 Operating Instructions Manual page 55

180 – AL CAN1 Node Lost
Cause
Alarm configuration; Connection
to a node on CAN bus 1 failed.
181 – AL CAN2 Node Lost
Cause
Alarm configuration; Connection
to a node on CAN bus 2 failed.
182 – AL CAN Wrong Parameters
Cause
Alarm configuration; Incorrect
parameter values entered in
data record.
183 – AL CAN No PU-Data
Cause
Alarm configuration; The
selected CAN mode initializes
communication by means of the
PU data module. However, the
necessary PU data module is not
present or is invalid.
184 – AL CAN PU-Data Flash Error
Cause
Alarm configuration; A
programming error occurred
when attempting to copy a
received PU data module into
the Flash module.
ZKP-Number: 2.0500.680
Corrective action
u Contact Service.
ZKP-Number: 2.0500.681
Corrective action
u Contact Service.
ZKP-Number: 2.0500.682
Corrective action
u Contact Service.
ZKP-Number: 2.0500.683
Corrective action
u Contact Service.
ZKP-Number: 2.0500.684
Corrective action
u Contact Service.
MS150029/02E 2013-03 | Troubleshooting | 55