MTU 12 V 4000 G73 Operating Instructions Manual page 133

Cleaning strainer
1. Shake coarse contamination out of strainer (5).
2. Clean all metallic parts with cleaner (Snow-White 11-0), then rinse with cleaner (Hakupur 312).
3. Use a soft brush to remove stubborn deposits from strainer if required. Ensure that the mesh is not
damaged.
4. Blow out strainer (5) with compressed air from inside.
Checking strainer
Item
Strainer
Strainer
Square-section ring
O-ring
Installing strainer
1. Coat square-section ring (4) on strainer (5) with engine oil and install strainer (5).
2. Insert strainer into housing.
3. Fill housing with new engine oil.
4. Coat O-ring (3) with engine oil and fit in filter housing.
5. Fit cover (2) and secure with screws (1) and washers.
Findings
Metallic residue
Damaged
Damaged
Damaged
MS150029/02E 2013-03 | Task Description | 133
Action
Clean
•
Monitor engine operation
•
Check strainer daily
•
• Contact Service.
Fit new part
Fit new part
Fit new part