Air Filter - Removal And Installation - MTU 12 V 4000 G73 Operating Instructions Manual

7.10.2 Air filter – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Torque wrench, 4-20Nm
Removing and installing air fil-
ter
1. Release clamp (2).
2. Remove air filter (1) and clamp (2) from
connecting flange of intake housing (3).
3. Verify that there are no objects in the con-
necting flange of the intake housing (3) and
clean it.
4. Place new air filter (1) with clamp (2) onto
intake housing (3).
5. Tighten screw on clamp (2) with torque wrench to the specified tightening torque.
Name
Screw
116 | Task Description | MS150029/02E 2013-03
Size Type
- Tightening torque
Part No.
F30044239
Lubricant Value/Standard
5Nm
Qty.
1