Table of Contents
Advertisement
2.
Remove HP fuel line (4).
3.
Remove return line (5).
Note:
The injector accumulator will be emptied
when removing the adapter.
4.
Remove adapter (3).
5.
Remove screw (2) and take off hold-down
clamp (1).
6.
Install installation/removal tool on cylinder
head.
7.
Remove injector with installation/removal
tool.
8.
Remove installation/removal tool.
9.
Remove sealing ring (4) from injector or
use a self-made hook to take it out of the
cylinder head.
10.
Remove O-rings (3), O-ring (2) and damper
ring (1) from injector.
11.
Clean all mating and sealing surfaces.
12.
Cover all connections and bores, or seal
with suitable plugs.
MS150029/02E 2013-03 | Task Description | 101
Hide quick links:
Advertisement
Table of Contents
