Fire Prevention And Environmental Protection, Fluids And Lubricants, Auxiliary Materials - MTU 12 V 4000 G73 Operating Instructions Manual

1.7 Fire prevention and environmental protection, fluids and
lubricants, auxiliary materials
Fire prevention
Rectify any fuel or oil leaks immediately. Oil or fuel on hot components can cause fires – therefore al-
ways keep the product in a clean condition. Do not leave cloths soaking with fluids and lubricants on
the product. Do not store combustible materials near the product.
Do not carry out welding work on pipes and components carrying oil or fuel. Before welding, clean with
a nonflammable fluid.
When starting the engine with an external power source, connect the ground lead last and remove it
first. To avoid sparks in the vicinity of the battery, connect the ground lead from the external power
source to the ground lead of the engine or to the ground terminal of the starter.
Always keep suitable firefighting equipment (fire extinguishers) at hand and familiarize yourself with
their use.
Noise
Noise can lead to an increased risk of accident if acoustic signals, warning shouts or noises indicating
danger are drowned.
Wear ear protectors in work areas with a sound pressure level in excess of 85dB (A).
Environmental protection and disposal
Modification or removal of any mechanical/electronic components or the installation of additional com-
ponents as well as the execution of calibration processes that might affect the emission characteristics
of the product are prohibited by emission regulations. Emission control units/systems may only be
maintained, exchanged or repaired if the components used for this purpose are approved by the manu-
facturer. Noncompliance with these guidelines will lead to forfeiture of the operating permit issued by
the emission monitoring authorities. The manufacturer does not accept any liability for violations of the
emission regulations. The maintenance schedules of the manufacturer must be observed over the entire
life cycle of the product.
Dispose of used fluids, lubricants and filters in accordance with local regulations.
Within the EU, batteries can be returned free of charge to the manufacturer where they are subjected to
proper recycling procedures.
Auxiliary materials, fluids and lubricants
The Fluids and Lubricants Specifications will be amended or supplemented as necessary. Prior to opera-
tion, make sure that the latest version is used. The applicable version may be downloaded at: http://
www.mtu-online.com/mtu/mtu-valuecare/mtu-valueservice-Technische-Dokumentation.
Auxiliary materials, fluids and lubricants might be hazardous goods or toxic substances.When using flu-
ids, lubricants, auxiliary materials and other chemical substances, follow the safety instructions that ap-
ply to the product. Take special care when using hot, chilled or caustic materials. When using flamma-
ble materials, avoid contact with ignition sources and do not smoke.
Used oil
Used oil contains harmful combustion residue.
Rub barrier cream into hands.
Wash hands after contact with used oil.
MS150029/02E 2013-03 | Safety | 15