Air Filter – Removal And Installation - MTU 20V4000L32FB Operating Instructions Manual

8.7.2 Air filter – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Torque wrench, 6–50 Nm
WARNING
Hot components/surfaces.
Risk of burns!
• Allow the engine to cool down to below 50 °C before beginning work.
• Wear suitable protective equipment/thermal gloves.
• Avoid unprotected contact with hot surfaces.
Air filter – Removal and installa-
tion
1. Loosen clamp (2).
2. Remove air filter (3) and clamp (2) from con-
necting flange (1) of intake housing.
3. Check connecting flange (1) of intake hous-
ing for obstruction.
4. Use suitable cleaning agent to clean contact
surfaces of intake housing and air filter.
Note: The contact surfaces must be dry and free
from grease.
5. Place new air filter (3) with clamp (2) onto in-
take housing (1).
6. Use torque wrench to tighten screw on clamp (2) to specified tightening torque.
Name
Screw
208 | Air Filter | MS150116/04E 2018-04
Size Type
- Tightening torque
Part No.
F30027336
Lubricant Value/Standard
20 Nm +2 Nm
Qty.
1