Oil Level Sensor - Club Car 2005 FE290 Maintenance Service Supplement

FE290 ENGINE
5
TYPICAL
4 PLACES
4
2
1

OIL LEVEL SENSOR

Testing the Oil Level Sensor
See Test Procedure 22, Section 11, Page 11-29.
Oil Level Sensor Removal
1. If not already removed, remove crankcase cover. See Crankcase Cover Removal on page 13-4.
2. Disconnect the oil level sensor wire (2) from the cord connection (1) (Figure 13-5, Page 13-6).
3. Remove the screw (3) from the wire clamp (4).
4. Remove the two mounting screws from the inside of the crankcase cover and remove the oil level sensor
and bracket.
5. If necessary, remove the three screws (7) that hold the sensor to the bracket (5).
2005 FE290 Gasoline Vehicle Maintenance and Service Supplement
Figure 13-4 Engine Mounting Plate
Crankcase
TYPICAL
3
2 PLACES
TYPICAL
6
2 PLACES
Page 13-5
13
A