Lcd And Control Panel; Battery Charging; Placement Of Charge Block - ECOVACS Deepoo ECO D58 Instruction Manual

LCD AND CONTROL PANEL

1) Power
2) Model selection
3) On/Pauza
4) Pause status
5) Fixed point cleaning mode
6) Go back charging mode
7) Border cleaning mode
8) Squelch cleaning mode
9) Automatic cleaning mode
10) Operation status
11) Cancel timing cleaning
12) Keep timing cleaning

5. BATTERY CHARGING

PLACEMENT OF CHARGE BLOCK

ENG - 112
13) One time timing cleaning
14) Time display
15) Timing cleaning status
16) Appointment timing adjust button
17) Curent time setting status
18) Batery display
19) Tip for cleaning dust box
20) Tip for lacking dust box
21) Tip for traped
22) Tip for driving wheel suspending
Put the block at an even place and make the base perpendicular
to the ground. Meanwhile, take a look at the marked electricity
voltage to make sure the product is used under instruction.
Tangle the power cord on the pothook and do not scatter it besi-
des the block or hold it under the base, in case that robot would
get impeded when it turns back to charging block.