Control Panel; Robot Charging; Placement Of Charging Block - ECOVACS ECO D54 Instruction Manual

Control Panel

1) Power
2) Auto Mode Selection
3) Squelch Mode Selection
4) Cycle Mode button
5) Back charging button

5. ROBOT CHARGING

Placement of charging Block

6) Battery Level
7) Alarming Indicator
8) Auto Mode Indicator
9) Cycle Mode Indicator
10) Squelch Mode Indicator
Put the block at an even place and make the base perpendicular
to the ground. Meanwhile, take a look at the marked electricity
voltage to make sure the product is used under instruction.
Tangle the power cord on the pothook and do not scatter it besi-
des the block or hold it under the base, in case that robot would
get impeded when it turns back to charging block.
There should not be any object at least 1.5 meter in front of
the charging block. Besides, anything with strong reflector is not
supposed to stay ahead of the infrared receiver. For example,
ground glass, smooth ceramic vase and so on. Other wise,
the machine shall not detect the charging block.
Please do not put the charging block to the staircase to avoid
accidental cases.
ENG
Enjoy Smarter Life
ENG - 89