Lighting Systems; Baitwell Light; Cabin Light - Head; Cockpit Lights - Bilge Light - Pro-Line Boats 29 Grand Sport Owner's Manual

12 Cockpit Lights – A 3-position switch operates both the cockpit and bilge lights. The cockpit
lights are small circular lights located at the console and/or around the cockpit. To activate the
cockpit lights, depress the switch to the up or forward position. Pressing the switch to the aft
position activates the bilge light. Move the switch to the center position to turn off the lights.
Note: This switch will not activate both types of lights at the same time.
13 Head Light – The head light switch provides power to the round light located in the head area.
To activate the head light, depress the switch to the up or forward position. Then press the
on/off switch located on the base of the light to turn on the light. Keep the cabin light switch in
the off position if the light is not going to be used soon.

Lighting Systems

Baitwell Light

The baitwell light switch is located on the switch panel and is labeled baitwell has a light symbol on the
switch. To turn on the baitwell light, press the switch forward and open the baitwell to see if the baitwell
light is on. Press the baitwell light switch to the down or aft position to turn off the light.

Cabin Light - Head

The cabin light switch provides power to the light that is located in the head. To operate the light in the
head, depress the cabin light switch on the console to the forward or on position. The light can then be
turned on or off from inside the head by depressing the small button on the base of the light assembly.
Cockpit Lights – Bilge Light
The cockpit/courtesy lights lights have LED (light emitting diode) bulbs with a lifespan of approximately
10,000 hours. The lights give off a soft warm light which should not affect your night vision, but will still
provide you with enough light to move around your cockpit safely in low visibility conditions.
Cockpit Lights - To activate the cockpit lights,
depress the 3-position switch to the up or forward
position. Pressing the switch to the aft position
activates the bilge light. Move the switch to the
center position to turn off the lights.
Note: The switch activates either the cockpit lights or the bilge light. It will not activate
both types of lights at the same time.

Navigation and Anchor/All Around Lights

The navigation and anchor/all around lights are required to be used for operation at night or under low
visibility conditions to indicate your position to other boaters.
navigation and anchor/all around lights and check to be sure that the lights are free from obstructions.
You should check your navigation lights monthly during optimum visibility conditions.
Bilge Light – The same light switch activates
the bilge light. Pressing the switch to the aft
position turns on the bilge light.
cockpit light switch to the center position to turn
the lights off.
Visually verify the operation of your
Move the
19