Table of Contents
Advertisement
TPT Devices
Enable or disable Intel IO Controller Hub (TPT) devices
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Azalia Controller
[HD Audio]
Select USB Mode
[By Controllers]
[Enabled]
UHCI #1 (ports 0 and
UHCI #2 (ports 2 and
[Enabled]
UHCI #3 (ports 4 and
[Enabled]
UHCI #4 (ports 6 and
[Enabled]
[Enabled]
USB 2.0 (EHCI) Support
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Select USB Mode
This field is used to select the USB's operation mode.
High Speed
If the USB device is a high speed device, it will operate in high speed mode. If it is a
full/low speed device, it will operate in full/low speed mode.
Full/Low Speed
Regardless of the speed of the USB device, it will always operate in full/low speed
mode.
UHCI 1~4
Control the USB UHCI (USB 1.1) function.
USB 2.0 (EHCI) Support
Enable or disable USB 2.0 (EHCI) support.
PCI Express Root Port 1, port 5 to PCI Express Root Port 7
Controls the PCI Express Root Port.
SLP_S4 Assertion Widt
Select a minimum assertion width of the SLP_S4 signal.
Chapter 7 BIOS Setup
Chapter 7
Boot
.
Azalia Controller
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
41
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main
Advanced
Chipset
Boot
Security
Save & Exit
Boot Confi guration
1
Setup Prompt Timeout
[On]
Bootup NumLock State
[Disabled]
Quiet Boot
07.69
CSM16 Module Version
[Force BIOS]
Option ROM Messages
[Postponed]
INT19 Trap Response
Boot Option Priorities
[SATA SM:WDC WD80...]
Boot Option #1
Hard Driver BBS Priorities
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Bootup NumLock State
This allows you to determine the default state of the numeric keypad. By default, the
system boots up with NumLock on wherein the function of the numeric keypad is the
number keys. When set to Off, the function of the numeric keypad is the arrow keys.
Quiet Boot
Enables or disables the quiet boot function.
Option ROM Messages
Set display mode for option ROM.
INT19 Trap Response
BIOS reaction on Int19 trapping by option ROM.
Immediate
Execute the trap right away.
Postponed
Execute the trap during legacy boot.
Hard Driver BBS Priorities
Set the order of the legacy devices in this group.
Number of seconds to
wait for setup activation
key.
65535(0xFFFF) means
indefi nite waiting.
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
www.dfi .com
Advertisement
Table of Contents
