F6 Floppy Configuration Utility
This is used to create a floppy driver diskette needed when you install Windows
XP using the F6 installation method. This will allow you to install the operating
system onto a hard drive when in AHCI mode.
1. Insert a blank floppy diskette.
2. Locate for the drivers in the CD then copy them to the floppy diskette. The
CD includes drivers for both 32-bit and 64-bit operating systems. The path to
the drivers are shown below.
32-bit
CD Drive:\AHCI_RAID\F6FLOPPY\f6flpy32
64-bit
CD Drive:\AHCI_RAID\F6FLOPPY\f6flpy64
Chapter 8 Supported Software
Chapter 8
Fintek HWMonitor Manager
Fintek HWMonitor Manager provides information about the Temperature, Fan, Voltage, and
®
Others information. To access the utility, click "Fintek HWMonitor Manager" on the main menu.
1. Under the Language Support
section, select the language
you would like the installa-
tion to display and then click
Next.
2. Setup is ready to install the
driver. Click Next.
3. Click "Install" to begin the
installation.
55
www.dfi .com