Table of Contents
Advertisement
CPU Configuration
This section is used to configure the CPU. It will also display the detected CPU
information.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
CPU Confi guration
Processor Type
Intel (R) Atom (TM) CPU
Supported
EMT64
Processor Speed
1865 MHz
System Bus Speed
533 MHz
Ratio Status
14
14
Actual Ratio
Processor Stepping
30661
Microcode Revision
268
L2 Cache RAM
2x56 k
2x512 k
L3 Cache RAM
Dual
Processor Core
Huper-threading
Supported
Hyper-threading
[Enabled]
[Enabled]
Execute Disable Bit
Limit CUPID Maximum
[Disabled]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Hyper-threading
Enable this field for Windows XP and Linux which are optimized for Hyper-Threading
technology. Select disabled for other OSes not optimized for Hyper-Threading technol-
ogy. When disabled, only one thread per enabled core is enabled.
Execute Disable Bit
XD can prevent certain classes of malicious buffer overflow attacks when combined
with a supporting OS (Windows Server 2003 SP1, Windows XP SP2, SuSE Linux 9.2,
RedHat Enterprise 3 update 3.)
Limit CUPID Maximum
The CPUID instruction of some newer CPUs will return a value greater than 3. The
default is Disabled because this problem does not exist in the Windows series operat-
ing systems. If you are using an operating system other than Windows, this problem
may occur. To avoid this problem, enable this field to limit the return value to 3 or less
than 3
.
Chapter 7 BIOS Setup
Chapter 7
IDE Configuration
This section is used to configure IDE functions.
Enabled for Windows XP
and Linux (OS optimized
for Hyper-Threading
Technology) and Disabled
for other OS (OS not
optimized for
Hyper-Threading
Technology).
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
33
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Port0
Not Present
SATA Port1
WDC WD800BEVS-(80.0G
SATA Controller(s)
[Enabled]
Confi gure SATA as
[IDE]
Misc Confi guration for hard disk
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Configure SATA as
Select a configuration for SATA controller.
SATA Ports (0-3) device
names if present and
enabled.
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
www.dfi .com
Advertisement
Table of Contents
