Blackdiamond Chassis Mounted In Rack - Extreme Networks BlackDiamond 6800 Hardware Installation Manual

I S
NSTALLATION AND ETUP
1 2 3
Figure 2-2: BlackDiamond chassis mounted in rack
4 Once the chassis is secured, remove the helper bracket.
5 Install the first power supply in an empty power supply bay by following these
steps:
a Ensure that the power supply is right side up, and the locking handle is open.
b Slide the power supply into the bay.
c Secure the power supply by rotating the locking handle up until it clicks in place,
and then tighten the screws using a #1 Phillips-head screwdriver.
2-4
4 A B 5 6 7 8
BDinrack
B D
LACK IAMOND
H I G
ARDWARE NSTALLATION UIDE