Blackdiamond 8810 Chassis - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

About the BlackDiamond 8800 Series Switches
Figure 2 shows the rear panel of the BlackDiamond 8806 chassis.
Figure 2: Rear Panel of the BlackDiamond 8806 Chassis
Grounding point
The rear panel of the BlackDiamond 8806 chassis provides:
Chassis serial number
●
Ethernet MAC address of the switch
●
Symbols of safety certification
●
Access to the PSU/fan controllers
●
Attachment point for optional chassis ground
●

BlackDiamond 8810 Chassis

The BlackDiamond 8810 chassis includes the following physical features:
One 10-slot chassis with backplane
●
Eight dedicated I/O module slots, labeled 1, 2, 3, 4, 7, 8, 9 and 10
●
One dedicated MSM slot, labeled 5/A
●
One dual-use slot for an I/O module or MSM, labeled 6/B. (Certain restrictions apply to the use of
●
slot 4/B. For more information see
on page 112.)
Power supply bay that accommodates up to six power supplies, accessed from the front of the unit
●
One fan tray, accessed from the front right of the unit
●
One connector for an ESD-preventive wrist strap
●
Depending on the MSMs and I/O modules installed, the BlackDiamond 8810 chassis can support up to
80 gigabits per second of bandwidth per slot.
16
"Chassis and Slot Compatibility Issues for 8900 Series Modules"
BlackDiamond 8800 Series Switches Hardware Installation Guide
PSU / fan
controllers
EX_128A