Stacking And Rack Mounting; Stacking - Altusen KVM OVER THE NET KN2116A User Manual
Ebterprise kvm solution by aten
Hide thumbs
Also See for KVM OVER THE NET KN2116A:
- Quick start manual (2 pages) ,
- User manual (310 pages) ,
- User manual (251 pages)
Table of Contents
Advertisement
KVM Over the NET™ User Manual
Stacking and Rack Mounting
The KVM Over the NET
mounted in a variety of ways. The following sections take you through the
procedures for each method.
Stacking
The KVM Over the NET
surface that can safely support its weight plus the weight of its attached cables.
To place the KVM Over the NET
chaining them, remove the backing material from the bottom of the rubber feet
that came with this package, and stick them onto the switch's bottom panel at
the corners, as shown in the diagram, below:
Note: To ensure adequate ventilation, allow at least 5.1 cm on each side, and
12.7 cm behind the unit for power cord and cable clearance.
16
TM
switch can be stacked on the desktop or rack
switch can be placed on any appropriate level
TM
switch, or to stack units if you are daisy-
TM
Advertisement
Table of Contents
Need help?
Do you have a question about the KVM OVER THE NET KN2116A and is the answer not in the manual?