Scan; Array - Altusen KVM OVER THE NET KN2116A User Manual

3. When you have finished editing the port name, press [Enter] or click
anywhere outside of the input box to complete the operation.

Scan

Scan is found at the bottom of the GUI Sidebar. It automatically switches
among all the ports that are visible in the Sidebar tree (see Filter, below), at
regular intervals, so that their activity can be monitored automatically.
See Auto Scanning, page 158 for details.
Note: This item doesn't appear at the bottom of the Sidebar in the Web
Browser version. You must invoke it from the port's Toolbar. See The
Port Toolbar, page 156, for details.

Array

Array is found at the bottom of the GUI Sidebar. It represents another way of
monitoring port activity. Under this function your screen is divided into a grid
of panels, with each panel representing. Only ports that are visible in the
Sidebar tree (see Filter, below), and that are on line are displayed – all other
ports are blank. See Panel Array Mode, page 161, for details.
Note: This item doesn't appear at the bottom of the Sidebar in the Web
Browser version. You must invoke it from the port's Toolbar. See The
Port Toolbar, page 156, for details.
Chapter 6. Port Access
89