Service Ports - Altusen KVM OVER THE NET KN2116A User Manual
Ebterprise kvm solution by aten
Hide thumbs
Also See for KVM OVER THE NET KN2116A:
- Quick start manual (2 pages) ,
- User manual (310 pages) ,
- User manual (251 pages)
Table of Contents
Advertisement
Service Ports
As a security measure, if a firewall is being used, the Administrator can specify
the port numbers that the firewall will allow. If a port other than the default is
used, users must specify the port number as part of the IP address when they
log in. If not, an invalid port number (or no port number) is specified, the KVM
Over the NET
TM
switch will not be found. An explanation of the fields is given
in the table below:
Field
Program
HTTP
HTTPS
Note: 1. Valid entries for all of the Service Ports are from 1–65535.
2. The service ports cannot have the same value. You must set a
different value for each one.
3. If there is no firewall (on an Intranet, for example), it doesn't matter
what these numbers are set to, since they have no effect.
This is the port number for connecting with the WinClient
ActiveX Viewer, WinClient AP, Java Applet Viewer, Java Client
AP, or via Virtual Media. The default is 9000.
The port number for a browser login. The default is 80.
The port number for a secure browser login. The default is 443.
Chapter 8. Device Management
Explanation
125
Advertisement
Table of Contents
Need help?
Do you have a question about the KVM OVER THE NET KN2116A and is the answer not in the manual?