Starting Up - Altusen KVM OVER THE NET KN2116A User Manual
Ebterprise kvm solution by aten
Hide thumbs
Also See for KVM OVER THE NET KN2116A:
- Quick start manual (2 pages) ,
- User manual (310 pages) ,
- User manual (306 pages)
Table of Contents
Advertisement
KVM Over the NET™ User Manual
Starting Up
To start the Log Server, either double click the program icon, or key in the full
path to the program on the command line. The first time your run it, a screen
similar to the one below appears:
Note: 1. The MAC address of the Log Server computer must be specified in
theANMS settings – see Log Server, page 130.
2. The Log Server requires the Microsoft Jet OLEDB 4.0 driver. See The
Log Server program does not run., page 205 if the program doesn't
start.
The screen is divided into three components:
A Menu Bar at the top
A panel that will contain a list of KVM Over the NET
middle (see The Log Server Main Screen, page 171).
A panel that will contain an Events List at the bottom
Each of the components is explained in the sections that follow.
166
TM
units in the
Advertisement
Table of Contents
Need help?
Do you have a question about the KVM OVER THE NET KN2116A and is the answer not in the manual?