Table of Contents
Advertisement
1-3 Cutting the Media After Printing
After printing is complete, it is possible to let the printer cut the media automatically along the "contour lines" you have
drawn in the image. This feature is useful, for example, when you want to make stickers using adhesive film media.
For information about how to draw contour lines, see "Roland VersaWorks Quick Start Guide".
Cutting the Media After Printing White Data and then CMYK Color Data
Perform the same operations under "Printing White Data and then CMYK Color Data" (page 8), except for the follow-
ing changes.
2
G In step
, draw the contour lines in the image you want to print, along with the CMYK layer of the image. When
you save the CMYK layer of the image as a PS file, make sure that the contour lines are also included. Save the
white layer of the image as a PS file without contour lines.
G Perform the following operations instead of step
❶
Click the [Queue A] tab in the main window.
❷
In the job list, double-click "Flag_Color.ps" (the PS file which contains the contour lines data along
with the CMYK color data).
❸
In the [Job Settings] dialog box that appears, make the following settings, and then click OK.
Icon
Cut Controls
❹
Click
to start printing.
Cutting starts automatically after printing and dry-out operations are complete.
Cutting the Media After Printing CMYK Color Data and then White Data
Perform the same operations under "Printing CMYK Color Data and then White Data" (page 12), except for the follow-
ing changes.
2
G In step
, draw the contour lines in the image you want to print, along with the white layer of the image. When you
save the white layer of the image as a PS file, make sure that the contour lines are also included. Save the CMYK
layer of the image as a PS file without contour lines.
G Perform the following operations instead of step
❶
Click the [Queue B] tab in the main window.
❷
In the job list, double-click "Flag_White.ps" (the PS file which contains the contour lines data along
with the white data).
❸
In the [Job Settings] dialog box that appears, make the following settings, and then click OK.
Icon
Cut Controls
❹
Click
to start printing.
Cutting starts automatically after printing and dry-out operations are complete.
9
Setup item
Operation Mode
9
Setup item
Operation Mode
.
Setting
Print & Cut
.
Setting
Print & Cut
19
Advertisement
Table of Contents
