To Resume The Set Speed - Mitsubishi LANCER 2012 Manual

WARNING
!
On vehicles with continuously variable transmission
(CVT) or Twin Clutch SST, although the cruise con-
trol will be disengaged when shifting to the "N"
(NEUTRAL) position, never move the selector lever
(CVT) or the gearshift lever (Twin Clutch SST) to
the "N" (NEUTRAL) position while driving.
You would have no engine braking and this could
cause a serious accident.
Also, the set speed driving may be deactivated as follow:
When the engine speed rises and approaches the tachome-
ter's red zone (the red-colored part of the tachometer dial).
CAUTION
!
When the set speed driving is deactivated automati-
cally in any situation other than those listed above,
there may be a system malfunction.
Press the "ON OFF" switch to turn off the cruise
control and have your vehicle inspected by an autho-
rized Mitsubishi Motors dealer or a repair facility of
your choice.

To resume the set speed

If the cruise control is deactivated by any of the conditions
described in "To deactivate" on page 3-164, you can return to
the previously set speed by pressing the "ACC RES" switch
(C) while driving at a speed of approximately 25 mph
(40 km/h) or greater.
Type 1
Type 2
I n f o r ma t i o n P r o v i d e d b y :
Features and controls
N00518900263
3
3-165