Watermark (Printing Control Numbers On The Background Of Copies) - Fuji Xerox ApeosPort-V C5580 User Manual

3 Copy
 Start & End Page Numbers
Allows you to specify the start and end pages to add prefix text and page numbers, in the
range from 1 to 9999.
Note
 Include Covers/Separators
This option is available when you select [All Pages]. Select this check box to include covers
and separators.
 Starting Number
You can specify a starting page number in the range from 1 to 999999999 when you do not
set [Number of Digits], or can specify a starting page number of up to the allowable number
of digits specified in [Number of Digits].
Note
Important • If the page number exceeds the specified value (999999999 when [Number of Digits] is not set)
3

Watermark (Printing Control Numbers on the Background of Copies)

This feature allows you to faintly print a sequential control number in the background of
each copy page.
If you set "1" as the starting number, "1" is printed on each page of the first copy set and "2"
is printed on each page of the second set.
To prevent, for instance, the duplication of confidential documents that are to be
distributed at a conference, you can use this feature to add sequential numbers to the
copies, and associate the numbers with the conference members.
Important • When you select this feature, if the number of pages scanned by the machine exceeds the
Note
1
Select [Watermark].
154
• Use [+] and [-], or the numeric keypad to enter the start and end page numbers.
• Use [+] and [-], or the numeric keypad to enter the starting page number.
during copying, the copy job will be canceled.
maximum, the machine will not print the already-scanned data. In that case, follow the instructions
of the message displayed on the screen to cancel the job. The maximum number of pages that the
machine can scan is 999 pages per job.
• If a layout template is specified in [Apply Layout Template to Copy/Print Jobs] under [Force
Annotation] in the System Administration mode, the watermark specified here is overlapped with
the text on the layout template when printed. For information on [Force Annotation], refer to "5
Tools" > "Common Service Settings" > "Force Annotation" in the Administrator Guide.
• When [Force Watermark - Copy] is set to [On], [Watermark] is fixed to [On], which cannot be
changed. For more information on Watermark, refer to "5 Tools" > "Common Service Settings" >
"Watermark" in the Administrator Guide.