Fuji Xerox ApeosPort-V C5580 User Manual page 69

 C3 Finisher (optional), C3 Finisher with Booklet Maker (optional), Folder Unit CD1
(optional)
No. Component
1 Transport Unit V1 front door Open this door to clear paper jams.
2 Tri-fold output tray button
3 Hole punch waste container
4 Output tray
5 Finisher tray
6 Staple cartridge
7 Booklet tray
8 Finisher front door
9 Booklet unit
10 Booklet staple cartridges
11 Tri-fold output tray
12 Folder unit door
Note • In some sections of this guide, "C3 Finisher" and "C3 Finisher with Booklet Maker" are referred to as
"finisher".
1 2
12
11
10 9
Press this button to open the tri-fold output tray.
Collects punch scraps from the puncher. Remove this container when
discarding the punch scraps.
Outputs are delivered here.
Outputs are delivered here.
Staples are stored in this cartridge. Pull out this cartridge to replace staples
or clear staple jams.
Bound booklets are delivered here.
Open this door to clear paper or staple jams, replace staples, or discard
punch scraps.
This unit is for folding outputs in half and stapling the folded outputs.
Two staple cartridges for booklet creation. Take out the cartridges when
clearing staple jams, or when replacing them with new ones.
Tri-folded outputs are delivered here.
Open this door to clear paper jams.
3
Function
Machine Components
4
5
6
7
8
69
2