Using Your Netlinx Master To Control The G4 Panels - AMX NXD-1700VG Instruction Manual
Modero vg series wall/flush mount touch panels
Hide thumbs
Also See for NXD-1700VG:
- Datasheet (3 pages) ,
- Quick start manual (2 pages) ,
- Dimension manual (1 page)
Table of Contents
Advertisement
Using your NetLinx Master to control the G4 panels
Refer to your particular NetLinx Master's instruction manual for detailed information on how to download the latest firmware from
www.amx.com. This firmware build enables SSL certificate identification and encryption, HTTPS communication, ICSP data
encryption, and disables the ability to alter the Master security properties via a TELNET session.
NOTE: In order to fully utilize the SSL encryption, your web browser should incorporate the an encryption feature. This encryption
level is displayed as a Cipher strength.
Once the Master's IP Address has been set through NetLinx Studio:
1.
Launch your web browser.
2.
Enter the IP Address of the target Master (ex: http://198.198.99.99) into the web browser's Address field.
3.
Press the Enter key on your keyboard to begin the communication process between the target Master and your computer.
Initially, the Master Security option is disabled (from within the System Security page) and no username and password is
required for access or configuration.
Both HTTP and HTTPS Ports are enabled by default (via the Manage System > Server page).
If the Master has been previously configured for secured communication, click OK to accept the AMX SSL certificate (if SSL
is enabled) and then enter a valid username and password into the fields within the Login dialog.
4.
Click OK to enter the information and proceed to the Master's Manage WebControl Connections window.
5.
This Manage WebControl Connections page (FIG. 87) is accessed by clicking on the Manage connections link (within the Web
Control section within the Navigation frame). Once activated, this page displays links to G4 panels running the latest G4 Web
Control feature (previously setup and activated on the panel).
G4 panels
Manage WebControl Connections page (populated with compatible panels)
FIG. 87
6.
Click on the G4 panel name link associated with the target panel. A secondary web browser window appears on the screen
(FIG. 88).
Web Control VNC installation and Password entry screens
FIG. 88
Modero VG Series Touch Panels - Instruction Manual
Configuring Communication
Compatible
devices field
(showing G4
WebControl links)
Compression
Options
90
Advertisement
Table of Contents
