Checking The Panel Connection Logs; Refreshing The Panel Connections Log; Clearing The Panel Connections Log; Panel Statistics Page Elements - AMX NXD-1700VG Instruction Manual

Features on this page include:
Panel Connection Logs Page Elements
Back:
Connection Status icon:
Connection Logs
Clear
Refresh
Page

Checking the Panel Connection Logs

1. Press the Tools button in the Protected Setup Navigation Buttons section. This opens the Tools menu.
2. Within the Tools menu, press the Panel Logs button. All connection data is contained in the section Connection Logs.

Refreshing the Panel Connections Log

1. Press the Tools button in the Protected Setup Navigation Buttons section. This opens the Tools menu.
2. Within the Tools menu, press the Panel Logs button.
3. Push the Refresh button.

Clearing the Panel Connections Log

1. Press the Tools button in the Protected Setup Navigation Buttons section. This opens the Tools menu.
2. Within the Tools menu, press the Panel Logs button.
3. Push the Clear button.
4. Confirm your selection.
Panel Statistics
The options on the Panel Statistics page (FIG. 127) allow you to track the connection status for the panel. The Panel Statistics page
tracks ICSP messages, Blink messages, Ethernet connection statistics, and Wireless connection statistics.
Panel Statistics page
FIG. 127
Features on this page include:

Panel Statistics Page Elements

Back:
Modero VG Series Touch Panels - Instruction Manual
Saves all changes and returns to the previous page.
The icon in the upper-right corner of each Setup page shows online/offline state of the panel to the master.
• Bright red - disconnected
• Bright green - connected. Blinks when a blink message is received to dark green every 5 seconds for half a
second then go back to bright green.
• Bright yellow - panel missed a blink message from the master. It will remain yellow for 3 missed blink
messages and then turn red. It will return to green when a blink message is received.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master.
A history of all connections, attempts, and failures for the panel.
Clears the Connection Logs history.
Refreshes the Connection Logs history.
Indicates the current page of the Connection Logs.
Use the Up and Down arrows to move from one page to the next.
Saves all changes and returns to the previous page.
Firmware Pages and Descriptions
127