Network Services; Set The Receiver Volume; Setting The Ringing Volume - Oricom care60 User Manual

Recall
Press the Recall button followed by the extension number to
transfer calls when connected to a PBX phone system (TBR
only).
Net work services
Access to additional network services can be gained by using
the Recall button , * and # keys. Contact your network operator
for more information.

Set the receiver volume

The receiver volume is adjusted using the volume switch on the
right side of the handset. Slide the switch to select:-
Low receiver volume.
Medium receiver volume.
Maximum receiver volume (Amplification to +24 dB).
NOTE: You can adjust the volume during the call.
WARNING: This phone is capable of providing extremely
loud volumes when the amplifier is activated and the volume
control is set to maximum. The utmost caution is necessary
when the phone is used jointly by people with normal
hearing and other with hearing loss.

Setting the ringing volume

The ringing volume is adjusted using switch.
Turns off ringer volume.
Low ringer volume.
High ringer volume.
5