Gear Shifting Switch And Gear Position Indicator - Suzuki GS850G Service Manual

ELECTRJCA L SYSTEM
GEAR SHIFTING SWITCH AND GEAR
POSITION INDICATOR
.
. I
'
I
1%
-.
f--
'\.--/'
P E A R SHlFllNO W I T C H
i
ih
I f the neutral indicator
light and gear position
indicator Eight do not
come on, disconnect
the
lead wires coming from the
gear shifting
switch at the
coupler and terminals,
and
check
continuity between the 0 lead and B1
lead, and also between the W/Y, RJB, G/B1,
Y/BI and Gr/R in the coupler
using the
Pocket Tester.
NOTE:
When
checking
t h ~ continuity
of [he
gear indicator (inside the coupler),
connect the positive
(I-
)
fermind of rhe
Pocket Tester
to the
ferminnl in
rite
coupler, and connecr
the
negative
I-)
termin01
to
Ihe orange lead wire.
If
there
is
no continujty,
,he
indicaror
l i ~ h t bulb
is
burnt
out
and if
should be
replaced.
If the above check
reveals
no
irregularity,
remove
the
gear shifting switch from the
crankcase,
and
using a lead
wire
of the
Pocket Tester, ground one of
the gear
shifting switch contact points and check the
condition of the pear shifting switch.
I f both
neutral and gear position indicator lights turn
on, the
switch is in good condition. (To make
this check,
the
ignition
switch should
be
turned
on with the
wiring
normal.)
Fig. 12-42
Fig. 12-44