Oil Filter Installation; Sump Filter Removal; Sump Filter Installation - Suzuki GS850G Service Manual

ENGINE
INSTALLATION
Oil filter installation
This package contains a rubber seal ring in
addition to the oil filter. When replacing
the oil filter. be sure to also replace the seal
ring
to
ensure oil-tightness.
In fitting the real ring to the filter chamber
cap. lightly apply grease on the seal ring
groove
to
avoid
any
chance of dropping or
rnislacating the ring during thc
installation
work.
1. Filter chamber Cap
2.
Rr~btwr
scnl
ring
Put on the cap
[T
and secure
it tightly
Install ail drain plug.
SUMP FILTER
REMOVAL
Remove screws of oil pan 7?
and remove
the
oil
pan from crankcase.
Fig. 7-
18~v
*
Remove three screws and then sump filter.
Fig.
7-189
INSTALLATION
Thorclughlp wash the sump filter with
solvent and fasten it with
three screws.
r -
i , i p .
7-190
Install oil pan and tighten
screws.
Replace gasket with a new
one to prevent
oil leakage.
Potrr
ahnut
3.6
L (3.8
US
qt) ofeng.ine oil
irjtn oil pan on!v whrr~ changitrg
oil
attd
replacing oilfilter
at the
same
time.
Tightening torque:
0.6-0.9 kg-rn
(4.5-6.5
Ib-ft)