Honeywell TH8320R1003 Vision Pro 8000 Product Data page 65

Hide thumbs Also See for TH8320R1003 Vision Pro 8000:
Table of Contents

Advertisement

1. Touch MENU.
Fig. 111.
2. Select Holiday Mode to display Temperature While Away.
Holiday Mode
Equipment Status
Fig. 112.
3. Touch
or
to select the Heat and Cool temperatures,
then touch Next to select return date.
Temperature
While Away
Fig. 113.
4. Review the settings and touch Done to save them. Touch
Cancel to ignore the changes.
NOTE: The cool temperature can only be set higher than
the unoccupied program setting and the heat tem-
perature can only be set lower than the unoccu-
pied program setting.
Initiating Occupancy Mode:
Commercial Use
This feature keeps temperature at an energy saving level until
you touch Press HERE to Start Occupancy. When you arrive,
touch the message to maintain a comfortable temperature
while the room is occupied.
MCR34100
MCR34122
Touch the
Until time. The temperature is maintained until the time you set.
Temperature returns to an energy-saving level after the timer
expires, or the "Occupied" period ends.
NOTE: This feature is available only when programmed
Remote Setback (Commercial Use)
During Occupied program periods, an occupancy sensor
directs the thermostat to go to REMOTE SETBACK settings
when the room is empty. If someone is in the room, it uses the
Occupied program period settings. The thermostat ignores the
occupancy sensor during Unoccupied program periods.
If the thermostat is set up to be non-programmable, the sensor
directs the thermostat to go to REMOTE SETBACK settings
when the room is empty. If someone is in the room, then it
follows the settings set by the user.
MCR34123
Depending on how your thermostat was installed, it may delay
for up to 30 minutes before switching to REMOTE SETBACK
settings. This delay allows the room to stay comfortable if the
room is unoccupied for only a short time.
Adjusting Humidification Settings
1. Touch MENU and select Humidification.
65
VISIONPRO
Press
HERE
Start Occupancy
Fig. 114.
or
buttons to set the temperature or the Hold
by the installer.
Fig. 115.
Humidification
Window Protection
Fig. 116.
®
8000 WITH REDLINK™
to
M34127
MCR34100
MCR34128
68-0312—01

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TH8320R1003 Vision Pro 8000 and is the answer not in the manual?

This manual is also suitable for:

Th8321r1001 vision pro 8000Th8110r1008 vision pro 8000

Table of Contents

Save PDF