Wlan Module - HP ENVY m6 Maintenance And Service Manual

WLAN module

Description
Qualcomm Atheros AR9565 802.11b/g/n 1×1 WiFi + BT 4.0 Combo Adapter
CAUTION:
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Remove the WLAN module:
1. Close the computer.
2. Turn the computer upside down with the front toward you.
3. Loosen the Phillips PM2.5×5.0 captive screw (1) that secures the service cover to the computer.
4. Lift the back edge of the service cover (2) until it detaches from the computer.
5. Remove the service cover (3).
The service cover is available using spare part number 720555-001.
6. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
30 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
To prevent an unresponsive system, replace the wireless module only with a wireless module
Battery on page 29).
Spare part number
733476-001